Radio/Audio System Operation

SETTING THE CLOCK FOR SYSTEM WITHOUT RADIO DATA SYSTEMS
Press and hold the HR or MIN arrow for two seconds. Then press the HR arrow until the correct hour appears. Press and hold the MIN arrow until the correct minute appears.

SETTING THE CLOCK FOR SYSTEM WITH RADIO DATA SYSTEMS
Press and hold HR and MIN for two seconds. Then press and hold HR until the correct hour appears. AM or PM Will appear on the display. Press and hold MN until the correct minute appears. The clock may be set with the ignition off. The clock symbol will appear on the display in time-set mode.

To set the clock to the time of a station that broadcasts RADIO DATA SYSTEMS (RDS) information, press and hold HR and MN at the same time for two seconds until UPDATED and the clock symbol appear on the display. If the time is not available from the station, NO UPDAT will appear on the display instead.