Seat Adjuster Replacement - Front (Six-Way Power)

Seat Adjuster Replacement - Front (Six-Way Power)

Removal Procedure

1. Remove the front seat from the vehicle. Refer to Seat Replacement - Front Bucket (Seat Replacement - Front Bucket) .




2. Remove the seat belt buckle nut.
Remove the seat belt from the seat.
3. Remove the J-hooks holding the seat trim cover to the seat frame.
4. Remove the front seat trim panel. Refer to Trim Panel Replacement - Front Seat (Trim Panel Replacement - Front Seat) .
5. Position the seat back all the way down.
6. Lift up on the cushion trim cover and pad to access the seat frame to adjuster bolts.




7. Remove the seat frame to adjuster bolts.
8. Disconnect the electrical harness from the adjuster cross brace.
9. Disconnect the seat belt electrical harness, drivers seat only.
10. Disconnect the electrical harness from the 3 electric motors.
11. Remove the lumbar adjuster relays from the motor bracket.
12. Remove the adjuster from the seat cushion frame.



Installation Procedure

1. Position the seat to the adjuster assembly.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the frame to adjuster bolts.

Tighten the bolts to 25 N.m (18 lb ft).

3. Position the seat back to the upright position.
4. Connect the electrical harness to the adjuster cross brace.
5. Connect the seat belt electrical harness, drivers seat only.
6. Connect the electrical harness from the 3 electric motors.
7. Install the lumbar adjuster relays to the motor bracket.
8. Install the seat pad and trim cover J-retainers.




9. Install the seat belt.

Tighten the nut to 42 N.m (31 lb ft).

10. Install the front seat trim panel. Refer to Trim Panel Replacement - Front Seat (Trim Panel Replacement - Front Seat) .
11. Install the front seat in the vehicle. Refer to Seat Replacement - Front Bucket (Seat Replacement - Front Bucket) .
12. Inspect the power seat adjusters. Verify that the adjusters are in phase with each other. Refer to Seat Adjuster Phase Adjustment - Power (Adjustments) .