High Mounted Stop Lamp Replacement (Rear Window Panel Mounted)

HIGH MOUNTED STOP LAMP REPLACEMENT (REAR WINDOW PANEL MOUNTED)

REMOVAL PROCEDURE
1. Open the rear compartment.




2. Disconnect the electrical connector from the high mounted stop lamp.
3. Remove the bulbs/sockets (1) from the high mounted stop lamp.
4. Remove the bulbs from the sockets.
5. Remove the rear window panel trim.
6. Pull the high mounted lamp (2) forward to disengage it from the retaining slots (3).
7. Remove the high mounted stop lamp from the rear shelf lifting up and out.

INSTALLATION PROCEDURE




1. Position the high mounted stop lamp lamp (2) tabs (3) to the slots in the rear shelf.
2. Install the high mounted stop lamp (2) pressing rearward until the high mounted stop lamp in fully seated.
3. Install the rear window panel trim.
4. Install the bulbs to the sockets (1).
5. Install the bulbs/sockets (1) to the high mounted stop lamp.
6. Connect the electrical connector to the high mounted stop lamp.
7. Close the rear compartment.