Scan Tool Data Definitions

SCAN TOOL DATA DEFINITIONS

AMBIENT LIGHT SENSOR: Displays 0-5 volts. The sunload sensor assembly signal, 0.09-4.80 volts is the normal operating range.

BATTERY VOLTAGE: Displays 0-20 volts. The voltage as received on the battery positive voltage circuit of the module.

CONTROL POWER: Displays On/Off. The state of control power.

DAYTIME RUNNING LAMP: Displays On/Off. The commanded state of the daytime running lamp relay.

DRIVER DOOR JAMB SW.: Displays On/Off. The state of the drivers door jamb switch. On indicates the door is open and Off indicates the door is closed.

FLASH TO PASS SWITCH: Displays On/Off. The state of the flash to pass switch.

FRONT FOG LAMP RELAY: Displays On/Off. The commanded state of the front fog lamp relay.

FRONT FOG LAMP SWITCH: Displays On/Off. The state of the front fog lamp switch.

HEAD LAMP SWITCH: Displays On/Off. The state of the headlamp switch. On indicates the headlamps are requested on.

HIGH BEAM - FLASH TO PA: Displays On/Off. The commanded state of the high beam relay.

HIGH BEAM LAMP: Displays On/Off. The state of the headlamp high beam switch.

HIGH BEAM SWITCH: Displays On/Off. The state of the headlamp high beam switch.

INADVERTENT POWER INPUT: Displays Active/Inactive. The state of the inadvertent power.

INADVERTENT POWER RELAY: Displays On/Off. The commanded state of the inadvertent power relay.

INCANDESCENT DIM 1: Displays 0-100%. The percentage of dimming sent to the incandescent lamps.

INTERIOR DIM POT: Displays 0-5 volts. The I/P dimmer switch input signal,0.09-4.80 volts is the normal operating range.

INTERIOR LAMP SWITCH: Displays On/Door. The state of the interior lamp switch.

KEY CYLINDER HALO LAMP: Displays On/Off. The commanded state of the key cylinder halo lamp.

LEFT REAR DOOR JAMB SW.: Displays On/Off. The state of the left rear door jamb switch. On indicates the door is open and Off indicates the door is closed.

LIGHTS ON WITH WIPERS: Displays On/Off. The state of the wiper/washer system.

LOW BEAM OUTPUT: Displays On/Off. The commanded state of the low beam relay.

LT. TURNING SIGNAL SW.: Displays On/Off. The state of the left turn signal switch.

OVERHEAD LAMPS OUTPUT: Displays On/Off. The commanded state of the overhead lamps.

PARK LAMP: Displays On/Off. The state of the park lamp switch.

PARK LAMP RELAY OUTPUT: Displays On/Off. The commanded state of the park lamp relay.

PASS. DOOR JAMB SW.: Displays On/Off. The state of the right front door jamb switch. On indicates the door is open and Off indicates the door is closed.

REVERSE LAMP RELAY: Displays On/Off. The commanded state of the reverse lamp relay.

RT. REAR DOOR JAMB SW.: Displays On/Off. The state of the right rear door jamb switch. On indicates the door is open and Off indicates the door is closed.

RT. TURNING SIGNAL SW.: Displays On/Off. The state of the right turn signal switch.

TWILIGHT DELAY POT: Displays 0-5 volts. The twilight delay switch input signal, 0.09-4.80 volts is the normal operating range.

VF DIM: Displays 0-19 volts. The HUD monitors the VF dimming signal circuit of the HUD switch, 2.0-11.0 volts is the normal operating range.