Body Control Module: Service and Repair

BODY CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Turn the ignition switch to the OFF position.




2. Remove the right insulator panels.
3. Slide the body control module (BCM) from the bracket.
4. Disconnect the BCM connectors from the BCM.
5. Remove the BCM (2).

INSTALLATION PROCEDURE




1. Connect the BCM connectors to the BCM.
2. Install the BCM (2) to the bracket.
3. Program the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration. Programming and Relearning
4. Install the right insulator panels.