Radio/Stereo: Service and Repair

RADIO REPLACEMENT

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Remove the audio system trim plate.
3. Remove the screws and the audio system.
4. Disconnect the audio system electrical connector and the antenna cable.

INSTALLATION PROCEDURE




1. Connect the audio system electrical connector and the antenna cable.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the audio system with the screws.

Tighten
Tighten the audio system screws to 6 N.m (53 lb in).

3. Install the audio system trim plate.
4. Connect the negative battery cable.
5. Enter the audio security system 4-digit code. Refer to Radio/Audio System Description and Operation.