4. Exhaust Manifold Removal
Exhaust Manifold Removal1. Disconnect the negative battery cable.
Caution: Refer to Battery Disconnect Caution in Service Precautions.
2. Disconnect the oxygen sensor connector.
Notice: Refer to Oxygen Sensor Notice in Service Precautions.
3. Remove the exhaust manifold heat shield.
4. Remove the exhaust manifold nuts from the pup converter.
5. Remove the exhaust manifold retaining nuts in the sequence shown and remove the exhaust manifold.
6. Remove the exhaust manifold gasket.
7. Clean the sealing surfaces of the exhaust manifold and the cylinder head.