Camshaft Position Sensor: Service and Repair

CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Remove the engine cover bolts and the nuts.
3. Remove the engine cover.




4. Disconnect the camshaft position (CMP) sensor electrical connector.
5. Remove the timing belt front cover.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the CMP sensor and bolt.

Tighten
Tighten the CMP sensor bolts to 7 N.m (62 lb in).




2. Install the timing bolt front cover.
3. Connect the CMP sensor electrical connector.
4. Install the engine cover.
5. Connect the negative battery cable.