Blower Motor: Service and Repair

BLOWER MOTOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the right side instrument panel insulator.




2. Disconnect the blower motor electrical connector.




3. Remove the blower motor mounting bolts.
4. Remove the blower motor.

INSTALLATION PROCEDURE




1. Install the blower motor.
2. Install the blower motor bolts.

Tighten the bolts to 1.5 N.m (13 lb in).

NOTE: Refer to Fastener Notice.




3. Connect the blower motor electrical connector.
4. Install the right side instrument panel insulator.