Shift Fork Cleaning and Inspection

Shift Fork Cleaning and Inspection





Measure the end thickness of shift fork and replace if below limit.
Specifications:
^ The standard shift fork end thickness for the low speed shift fork is 8.7 mm (0.343 inch).
^ The shift fork end thickness limit for the low speed shift fork is 8.1 mm (0.319 inch).
^ The standard shift fork end thickness for the high speed shift fork is 7.8 mm (0.307 inch).
^ The shift fork end thickness limit for the high speed shift fork is 7.2 mm (0.283 inch).
^ The standard shift fork end thickness for the fifth gear shift fork is 7.8 mm (0.307 inch).
^ The shift fork end thickness limit for the fifth gear shift fork is 7.2 mm (0.283 inch).