Driver Information Center (DIC) Compass Inaccurate or C Displayed

Driver Information Center (DIC) Compass Inaccurate or C Displayed

Diagnostic Fault Information

Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview

Circuit/System Testing

1. Ignition ON, verify that the DIC compass does not display "C" or "CAL".

• If the DIC compass displays "C" or "CAL", perform the Compass Calibration and Magnetic Variance procedure. Refer to Electronic Compass Calibration.

2. Verify that the DIC compass display is not blank.

• If the DIC compass display is blank, replace the DIC.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests

Programming and RelearningProgramming and Relearning