Transaxle Case Assembly

Transaxle Case Assembly





Notice: Refer to Fastener Notice.

1. Install the speedometer-driven gear bolt and the speedometer-driven gear into the transaxle housing.

Tighten the speedometer-driven gear bolt to 4 N.m (35 lb in).




2. Install the clutch-release bearing guide and the clutch-release bearing.
3. Install the backup lamp switch into the transaxle housing.

Tighten the backup lamp switch to 20 N.m (15 lb ft).




4. Install the differential into the transaxle housing.
5. Install the bearing plate, with the shafts attached.
6. Install the bearing plate bolts.

Tighten the bearing plate bolts to 22 N.m (16 lb ft).




7. Install the transaxle cover and the transaxle cover bolts.

Tighten the transaxle cover bolts to 18 N.m (13 lb ft).




8. Install the gearshift lever cover and the gearshift lever cover bolts.

Tighten the gearshift lever cover bolts to 22 N.m (16 lb ft).

9. Install the transaxle into the vehicle.