Radio Antenna Module Replacement

Radio Antenna Module Replacement

Removal Procedure

1. Lower the headliner leaving the wiring harness attached. Refer to Headlining Trim Panel Replacement.
2. Disconnect the electrical connectors from the antenna module.




3. Remove the fastener from the antenna and remove the antenna module.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the antenna module and secure with the fastener.

Tighten the fastener to 3 N.m (26 lb in).

2. Connect the electrical connectors to the antenna module.
3. Install the headliner.