Instrument Panel Center Support Bracket Replacement

Instrument Panel Center Support Bracket Replacement

Removal Procedure




1. Remove the body control module.
2. Remove the center console.
3. Remove the instrument panel (I/P) center support bracket bolts.
4. Remove the I/P center support bracket.

Installation Procedure




1. Install the I/P center support bracket.

Notice: Refer to Fastener Notice.

2. Install the I/P center support bracket bolts.

Tighten the bolts to 10 N.m (89 lb in).

3. Install the body control module.
4. Install the center console.