Air Cleaner Outlet Duct Replacement (1st Design)

Air Cleaner Outlet Duct Replacement (1st Design)

Removal Procedure




1. Remove the intake manifold cover.
2. Reposition the positive crankcase ventilation (PCV) hose clamp (2) at the outlet duct.
3. Remove the PCV hose (1) from the air cleaner outlet duct.




4. Loosen the air cleaner outlet duct clamp (1) at the throttle body.




5. Loosen the air cleaner outlet duct clamp (1) at the air cleaner assembly.
6. Remove the air cleaner outlet duct (2) from the air cleaner and the throttle body.

Installation Procedure




1. Install the air cleaner outlet duct (2) to the air cleaner and the throttle body.

Notice: Refer to Fastener Notice.

2. Tighten the air cleaner outlet duct clamp (1) at the air cleaner assembly.

Tighten the clamp to 4 N.m (35 lb in).




3. Tighten the air cleaner outlet duct clamp (1) at the throttle body.

Tighten the clamp to 4 N.m (35 lb in).




4. Install the PCV hose (1) to the air cleaner outlet duct.
5. Position the PCV hose clamp (2) at the outlet duct.
6. Install the intake manifold cover.