Tachometer Inaccurate or Inoperative

Tachometer Inaccurate or Inoperative

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview
* Review Strategy Based Diagnosis for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions provide an overview of each diagnostic category.

Circuit/System Description

The instrument panel cluster (IPC) displays the engine speed based on the engine speed data from the body control module (BCM). The engine control module (ECM) sends the engine speed signal information via the serial data circuit to the BCM. The BCM sends a message to the IPC indicating the engine speed. The IPC displays the engine speed based on the serial data message from the BCM.

Circuit/System Testing

Ignition ON, with the scan tool, perform the IPC Gage Sweep Test in the IPC Output Controls. Verify that all gage dials move from minimum to the maximum value and back to the gage minimum value.

If the tachometer does not perform the IPC Gage Sweep Test, replace the IPC.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests