Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement

Removal Procedure





1. Remove the front floor console left side panel. Refer to Console Trim Plate Replacement (Service and Repair) .
2. Disconnect the park brake warning lamp switch electrical connector (1).
3. Remove the park brake warning lamp switch to park brake lever assembly retaining screw (4).
4. Remove the park brake warning lamp switch (2) from the park brake lever assembly (3).



Installation Procedure





1. Connect the park brake warning lamp switch electrical connector (1).
2. Install the park brake warning lamp switch (2) to the park brake lever assembly (3).
3. Install the park brake warning lamp switch to park brake lever assembly retaining screw (4).

Tighten the bolt to 2 Nm (18 lb in).

4. Install the front floor console left side panel. Refer to Console Trim Plate Replacement (Service and Repair) .