Body/Frame - Front End Module Replacement (Collision Repair)
INFORMATIONBulletin No.: H12-10-05
Date: May 16, 2012
Subject: Front End Module Replacement (Collision Repair)
Models:
2007-2011 Chevrolet Caprice, CSV, Lumina, Omega
2011 Chevrolet Caprice PPV
2009-2010 Daewoo W200 Veritas
2007-2009 Pontiac G8
2007-2011 Vauxhall VXR8
All Body Styles (SWB, LWB, Ute)
Front end module assembly replacement parts for 2007-2011 model year vehicles are superseded by the 2012 model year front end module assemblies.
2012 model year modules do not have captive nuts for the front airbag sensors as used in the 2007-2011 modules, so two additional attaching nuts must be used during installation.
When fitting a 2012 model year front end module assembly to a 2007-2011 model year vehicle, follow the procedure listed below.
Revised Service Replacement Procedure
1. Install the existing wiring harness connectors to the front airbag senors.
2. Position the front airbag sensors and bolts into the new front end module airbag sensor mount holes as shown below.
3. Fit the nuts, P/N 11900428 onto the sensor bolts at both locations as shown below.
Tighten
Tighten the bolts to 9 (80 lb-in).
For basic replacement information, refer to Front End Panel Module Carrier Assembly Replacement in SI.
Parts Information
Disclaimer