System Specifications
Crankshaft Balancer Retaining BoltInstallation Pass to Ensure the Balancer is Completely Installed 330 Nm (240 lb ft.)
First Pass - Install a NEW Bolt After the Installation Pass and Tighten as Described in the First and Final Passes 50 Nm (37 lb ft.)
Final Pass 140 °
Overhaul
Engine Front Cover to Cylinder Block Retaining Bolts 25 Nm (18 lb ft.)
Camshaft Retaining Bolts - Hex Head Bolts 25 Nm (18 lb ft.)
Camshaft Retaining Bolts - TORX(R) Head Bolts 15 Nm (11 lb ft.)
Camshaft Sprocket Bolt
First Pass 75 Nm (55 lb ft.)
Final Pass 50 °
Overhaul
Timing Chain Tensioner Retaining Bolts 25 Nm (18 lb ft.)