Auxiliary Power Outlet: Service and Repair
Cigar Lighter Receptacle or 12-Volt Accessory Power Receptacle Replacement
Instrument Panel
Tools Required
J 42059 Cigar Lighter Socket Remover
Removal Procedure
Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair) .
2. With any accessories removed, place the T receptacle of J 42059 into one of the retaining tabs (1). Angle the other side into the opposite retaining tab. Pull the power accessory receptacle straight out.
3. Disconnect the power accessory receptacle electrical connector (1).
4. Remove the bezel (1).
Installation Procedure
1. Install the bezel (1).
2. Connect the power accessory receptacle electrical connector (1).
3. Install the accessory power receptacle to the receptacle bezel.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair) .
Centre Console - Rear
Tools Required
J 42059 J 42059 Cigar Lighter Socket Remover
Removal Procedure
Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair) .
2. With any accessories removed, place the T receptacle of J 42059 into one of the retaining tabs (1). Angle the other side into the opposite retaining tab. Pull the power accessory receptacle straight out.
3. Disconnect the power accessory receptacle electrical connector (1).
4. Remove the bezel (1).
Installation Procedure
1. Install the bezel (1).
2. Connect the power accessory receptacle electrical connector (1).
3. Install the accessory power receptacle to the receptacle bezel.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair) .
Centre Console
Tools Required
J 42059 J 42059 Cigar Lighter Socket Remover
Removal Procedure
Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair) .
2. Place the T receptacle of J 42059 into one of the retaining tabs (1). Angle the other side into the opposite retaining tab. Pull the power accessory receptacle straight out.
3. Disconnect the power accessory receptacle electrical connector (1).
4. Remove the bezel (1) and the cover (2).
Installation Procedure
1. Install the cover (2) and the bezel (1).
2. Connect the power accessory receptacle electrical connector (1).
3. Install the accessory power receptacle to the receptacle bezel.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair) .