Output Speed Sensor Replacement

Output Speed Sensor Replacement

Removal Procedure

1. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement (Removal and Replacement) .




2. Disconnect the electrical connector (3) from the output speed sensor (2).




3. Remove the output speed sensor retaining bolt (3).
4. Remove the output speed sensor (2).
5. Remove the output speed sensor spacer (1).
6. Inspect the output speed sensor (2) for the following conditions:

* Damaged or missing magnet
* Damaged housing
* Bent or missing electrical terminals




Installation Procedure





1. Install the output speed sensor spacer (1).
2. Install the output speed sensor (2).

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the output speed sensor retaining bolt (3).

Tighten the output speed sensor bolt to 11 N.m (97 lb. in).





4. Connect the electrical connector (3) to the output speed sensor (2).
5. Install the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement (Removal and Replacement) .