Liftgate Latch Replacement

Liftgate Latch Replacement

Removal Procedure





1. Open the liftgate.
2. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Service and Repair).
3. Disconnect the latch cable (1).
4. Disconnect the electrical connector (5) from the liftgate latch (3).
5. Disconnect the rod (2) from the lock cylinder. Refer to Liftgate Lock Cylinder Replacement (Service and Repair).
6. Remove the bolts (4) from the liftgate latch (3).
7. Remove the liftgate latch (3) from the liftgate.



Installation Procedure





1. Install the liftgate latch (3) to the liftgate.

Notice: Refer to Fastener Notice .

2. Install the bolts (4) to the liftgate latch (3).

Tighten the liftgate latch bolts (4) to 7 N.m (62 lb in).

3. Connect the rod (2) to the lock cylinder. Refer to Liftgate Lock Cylinder Replacement (Service and Repair).
4. Connect the electrical connector (5) to the liftgate latch (3).
5. Connect the latch cable (1).
6. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Service and Repair).
7. Close the liftgate.