Rear Wheel Speed Sensor Replacement

Rear Wheel Speed Sensor Replacement

Removal Procedure






Important: The wheel speed sensor is serviceable only as an assembly. Do NOT attempt to service the sensor harness pigtail.


1. Disconnect the electrical connector (6) from the wheel speed sensor.
2. Remove the rear axle hub and bearing assembly. Refer to Rear Wheel Bearing and Hub Replacement (Rear Suspension).




3. Remove the wheel speed sensor from the rear axle hub.



Installation Procedure






Notice: Refer to Fastener Notice .

1. Install the wheel speed sensor to rear wheel hub.
2. Install the rear axle hub and bearing assembly. Refer to Rear Wheel Bearing and Hub Replacement (Rear Suspension).




3. Connect the wheel speed sensor electrical connector (6).
4. Perform Diagnostic System Check - Vehicle (Initial Inspection and Diagnostic Overview).