Dimmer Switch: Service and Repair

Instrument Panel Lamp Dimmer Switch Replacement

Removal Procedure





1. Remove the left I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side (Service and Repair).
2. Disconnect the electrical connectors.
3. Using a taped flat bladed tool, gently pry and release the clips around the dimmer switch (3).



Installation Procedure





1. Install the dimmer switch (3) to the power mirror switch/dimmer switch plate (2).
2. Connect the dimmer/switch electrical connector (2).
3. Install the left I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side (Service and Repair).