12-Volt Accessory Power Receptacle Replacement

12-Volt Accessory Power Receptacle Replacement

Removal Procedure





1. Remove the rear floor console. Refer to Rear Floor Console Replacement (Service and Repair).
2. Turn the socket in a counter clockwise direction.
3. Disengage the tab between the socket and cover.
4. Align the socket with the notch and remove socket assembly.



Installation Procedure





1. Align the socket with the notch on the cover, and push in to install.
2. Install the rear floor console. Refer to Rear Floor Console Replacement (Service and Repair).