Door Window Guide Replacement

Door Window Guide Replacement

Removal Procedure





1. Remove the rear side door trim. Refer to Rear Side Door Trim Panel Replacement (Service and Repair).
2. Remove the rear water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).
3. Loosen the rubber window run channel along the center guide channel.
4. Remove the following components from the rear door:

* The 2 bolts (2)
* The 2 screws (3)
* The window guide channel (1)




Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the window guide channel (1) to the rear door. Secure the guide channel with the 2 bolts (2) and the 2 screws (3).

Tighten the window guide channel bolts to 6.2 N.m (55 lb in).

2. Install the rubber window run channel into the center guide channel.
3. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).
4. Install the rear side door trim. Refer to Rear Side Door Trim Panel Replacement (Service and Repair).