Cylinder Head Assembly: Specifications
CYLINDER HEADRight Sequence:
Left Sequence:
Cylinder Head Bolt - M8
First Pass 15 Nm (11 lb ft)
Final Pass 75 Degrees
Cylinder Head Bolt - M11
First Pass 30 Nm (22 lb ft)
Final Pass 150 degrees
CYLINDER HEAD BOLT RE-USABILITY
Notice: DO NOT allow oil on the cylinder head bolt bosses. DO NOT reuse the old cylinder head bolts.
INTAKE MANIFOLD
Upper-to-Cylinder Head Bolt
Long 23 Nm (17 lb ft)
Short 23 Nm (17 lb ft)
Upper-to-Lower Intake Manifold Bolt 23 Nm (17 lb ft)
CAMSHAFT BEARING CAP
Right (SFI):
Left:
Camshaft Cap Bolt 10 Nm (89 lb in)
EXHAUST MANIFOLD
Exhaust Manifold Bolt 20 Nm (15 lb ft)