Wiper Switch: Service and Repair

Windshield Wiper and Washer Switch Replacement

Removal Procedure

1. Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement (Steering Column Trim Cover Replacement).




2. Press top and bottom tabs in and Pull the wiper/washer switch out if the column assembly.
3. Disconnect the wiper/washer switch electrical connector.

Installation Procedure




1. Install the Wipers/Washer signal switch to the steering column. Listen for an audible click to confirm fitting.
2. Connect the wiper/washer switch electrical connector.
3. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (Steering Column Trim Cover Replacement).
4. Test wiper and washer system for correct operation.