Adjusting Sun Roof Microswitch on Electric Drive

Adjusting Lifting Sun Roof Microswitch On Electric Drive





Microswitches I and II can only be adjusted together. In longitudinal direction leave a 7 mm clearance between the outer edges of the microswitches and the recess. In transverse direction they must be adjusted so that they switch reliably, but are not damaged mechanically by the lever. A clearance of 2.5 mm must be observed in the case of microswitch III.

Lever position:
1 - released
2 - locked
3 - open


Connections on the microswitches





Wire connections on microswitch I
1 - black/red
2 - green/red
4 - black

Wire connections on microswitch II
1 - grey/green
2 - not connected
4 - grey/black

Wire connections on microswitch III
1 - yellow
2 - yellow/black
4 - not connected