Removing/Installing Oil Cooler (Engine Mounted)
REMOVING AND INSTALLING OIL COOLERGeneral:
Beginning with the 1973 models, all six-cylinder engines are equipped with a two-piece air shroud which simplifies the removal and installation of the oil cooler.
Removing
1. Remove air filter top.
2. Remove front engine shroud.
3. Remove right engine shroud.
4. Remove oil cooler air duct.
5. Drain oil.
6. Detach oil hose from oil cooler and remove lower retaining nuts.
7. Remove upper retaining nuts and oil cooler.
Installing
Install new sealing rings at the oil cooler.
NOTE: When positioning the oil cooler on crankcase, make sure that sealing rings are properly seated.