Mode 6

Mode 6
The test results of components or systems which are not continuously monitored are displayed in mode 6. At the same time, limit values are provided. The test results are referred to as TID (Test Identification). The components or systems are distinguished by CID's (Component Identification).

The following components or systems are supported:

TWC conversion, bank 1
TID $01 CID $01

TWC conversion, bank 2
TID $01 CID $02

Secondary air system, bank 1
TID $03 CID $03

Secondary air system, bank 2
TID $03 CID $04

Secondary air system, bank 1
TID $03 CID $05

Secondary air system, bank 2
TID $03 CID $06

NOTE:
- If the DME has performed active diagnosis, then CID's $03 and $04 are displayed.
- If, however, diagnosis was passive, then CID's $05 and $06 are displayed.

EVAP canister purge valve
TID $05 CID $0A

EVAP canister shutoff valve
TID $05 CID $0B

Fuel tank ventilation system (major leak)
TID $05 CID $0C

Fuel tank ventilation system (micro-leak)
TID $05 CID $0D

EVAP canister shutoff valve
TID $05 CID $11

Fuel tank ventilation system
TID $05 CID $12

Fuel tank ventilation system
TID $05 CID $13

Fuel tank ventilation system
TID $05 CID $14