Fault Code 9123

Fault Code 9123

Oil Level

Diagnostic conditions
- Evaluation after triggering of oil level measurement in the on-board computer

Possible cause of fault
- Short circuit to ground/voltage or open circuit in the wiring between the oil level sender and instrument cluster
- Oil level sender faulty

NOTE:
- Fault code 9123 is entered after the oil level measurement is triggered in the event of a fault. The warning 'oil level indication failure" is issued at the same time in the display of the instrument cluster.
- After the cause of the fault has been remedied, the oil level measurement must be re-triggered. After the oil level measurement has been completed, the fault changes from "present" to "not present"

Affected pins
Instrument cluster connector B, pin 2 and pin 18

Diagnosis/Troubleshooting

Work Instruction 1 - 6: