Tiptronic System G 50

Component Arrangement:

1. Upshift and downshift switches
Installation position: In the steering wheel.

2. DME control module
Mounting location for coupe:
Vehicle interior behind the right-hand spare seat trough.

Mounting location for Cabriolet:
In the convertible top box on the roll-over system frame.

3. Tiptronic control module
Mounting location for coupe:
Vehicle interior behind the right-hand spare seat trough.

Mounting location for Cabriolet:
In the convertible top box on the roll-over system frame.

4. Coolant changeover valve
Installation position: On the engine (transport eye).

5. Multi-function switch
Installation position: On the transmission.

6. Solenoid valves (SV)
Installation position: On the hydraulic control unit in the transmission.

7. Sender for ATF temperature
Installation position: The sender is integrated in the transmission wiring harness. If it is damaged, the entire wiring harness must be replaced.

8. Sender for transmission input speed
Installation position: On the hydraulic control unit in the transmission.

9. Sender for transmission speed
Installation position: Beside the hydraulic control unit in the transmission.

10. ABS control module
Installation position: In the front luggage compartment.

11. Stop light switch
Installation position: In front of the brake pedal.

12. Kick-down switch
Installation position: In the accelerator pedal box in front of the accelerator.

13. Selector lever with manual switch
The selector lever transmits the selector lever positions to the transmission and the multiFunction switch via a cable.

14. Instrument cluster
The respective selector lever position and the engaged gear are displayed in the instrument cluster.