Fault Code 10

Fault Code 10

Closing aid micro switch locked, Signal implausible

Diagnostic conditions
- Ignition on
- Targa rear window first locked and then unlocked

Possible cause of fault
- Short circuit to ground/open circuit between the micro switch "locked" and the control module
- Micro switch "locked" in the closing aid defective

NOTE:
- The status of the three micro switches in the closing aid for the Targa rear window can be read out in the menu item "Input signals" under Closing aid switch I to III.
- There are 3 micro switches in total in the closing aid module

Status of the closing aid micro switches
Status Tester display
Targa rear window closed (locked) Closing aid switch I actuated
Closing aid switch II actuated
Closing aid switch III actuated

Targa rear window open (unlocked) Closing aid switch I not actuated
Closing aid switch II not actuated
Closing aid switch III actuated

Affected terminals
Plug A, terminal 17

Diagnosis/troubleshooting

Work Instruction 1 - 5: