Removing

Removing oil extraction pump - GT3




Component views

Removal overview of the oil extraction pump - GT3
1 Undo return line
2 Undo fastening screws
3 Remove oil extraction pump


Numbered Procedures and Instructions

Warning: Danger of scalding from draining oil!
^ Wear protective equipment specified.





1.
Undo return line
Undo return line on the oil extraction pump. Make sure to counter with a wrench when doing this. Collect draining oil.





2.
Undo fastening screws
Undo the three fastening screws and remove.





3.
Remove oil extraction pump
Remove oil extraction pump at the camshaft housing. If the oil extraction pump is stuck, loosen the oil pump by gently tapping with a plastic hammer. Remove the oil pump to the rear.