Fault Code 9102
Fault Code 9102
CAN Comfort Bus
Diagnostic conditions
- Ignition on
Possible cause of fault
- Short circuit between the two CAN leads (CAN-high and CAN-low)
- Short circuit between CAN-high (Comfort) ground
- Short circuit between CAN-low (Comfort) voltage
- A faulty control module connected to CAN comfort bus
NOTE:
The CAN Comfort bus is connected to the following control modules:
- Air conditioning
- Instrument cluster
- PCM 2 as of model year 2003
NOTE: During troubleshooting, the plugs on the instrument cluster are reattached In Step 4 white the plugs on the air-conditioning system control module remain removed. Due to the system, fault code "9215 air-conditioning control module" is additionally entered in the fault memory of the instrument cluster.
Affected pins
Instrument cluster connector A, pin 14 and pin 30
Diagnosis/Troubleshooting