Oil Extraction Pumps

Removing and installing oil extraction pumps

Removal
At each cylinder head, undo 4 hexagon-head bolts fastening the oil extraction pump.

Note After removing the oil extraction pumps, do not lay them on the drivers.

Installation

Note The oil extraction pumps on the cylinder heads are identical parts. Therefore, the installation position or direction of rotation must be correct.





Installation position of oil extraction pump at cylinder head 1-3 (flywheel side): The arrow for the direction of rotation or the marking "1 - 3" must face the crankcase.




Installation position of oil extraction pump at cylinder head 4-6 (pulley side): The arrow for the direction of rotation or the marking "4 - 6" must face the crankcase or the coolant temperature sensor.