Test Point 5

Test point 5
Buckle, driver
Fault codes 44, 45,
46, 50

Note
Only on USA vehicles:

1. Disconnect the plug connection X16.

2. Connect ohmmeter on the pin side on pins B7 and B8.
Display: approx. 400 Ohms

Note

The belt tongue must not be inserted in the buckle.

3. Connect ohmmeter on the pin side on pin B7 and ground.
Display: Ohms

4. Connect ohmmeter on the pin side on pins B7 and B8.
Insert the belt tongue in the buckle.
Display: approx. 100 Ohms

5. Inspect the wiring harness to the triggering unit for pinches and chafing damage.