Test Point 14

Test point 14
Washer fluid level

- Ignition on

- Engine off

PST2 display: OK

- Check washer fluid level

- Switch off ignition

- Washer fluid level full

- Pull off plug on sensor for fluid level display

- Ohmmeter directly on sensor for fluid level display, pin 1 and pin 2
Ohmmeter display: < 5 Ohms

If not, replace sensor for fluid level display.

- Ohmmeter on plug of sensor for fluid level display pin 2 and ground

- Ohmmeter display: < 5 Ohms

- Pull off plug II on the instrument cluster

- Ohmmeter on instrument cluster plug II pin 26 and plug on sensor for fluid level display, pin 1
Ohmmeter display: < 5 Ohms

- See also Drive Links chapter, "Washer fluid warning light"