P1340
P1340Position of Camshaft in Relation to Crankshaft, Bank 1 - Below Limit
Diagnosis conditions
- Idle speed
- Reference mark recognized
- Engine speed between 600 rpm and 1,200 rpm.
- Engine temperature greater than 40 °C
- No fault in camshaft position sensors
- Reference mark OK
- No fault in camshaft adjustment
- No fault in engine temperature
- No fault in camshaft adjustment output stage
Possible fault cause
- Allocation of camshaft to inlet camshaft incorrect
Affected terminals
-
Diagnosis/Troubleshooting
NOTE: This fault is stored if the engine was disassembled and the allocation of the camshaft to the inlet camshaft was incorrectly set.
Position of Camshaft in Relation to Crankshaft, Bank 1 - Above Limit
Diagnosis conditions
- Idle speed
- Reference mark recognized
- Engine speed between 600 rpm and 1,200 rpm.
- Engine temperature greater than 40 °C
- No fault in camshaft position sensors
- Reference mark OK
- No fault in camshaft adjustment
- No fault in engine temperature
- No fault in camshaft adjustment output stage
Possible fault cause
- Solenoid hydraulic valve camshaft adjustment faulty
- Allocation of camshaft to inlet camshaft incorrect
Affected terminals
-
Diagnosis/Troubleshooting
Figure 1:
Figure 2:
