P1349

P1349

Camshaft Adjustment, Bank 1 - Below Limit

Diagnosis conditions
- Time elapsed after start-up greater than 5 seconds
- Engine temperature greater than -10 °C
- Engine speed between 680 rpm and 6760 rpm
- No fault in camshaft adjustment output stage
- Reference mark OK
- No fault in camshaft position sensors
- No fault in engine temperature

Possible fault cause

NOTE: Solenoid hydraulic valve is triggered, camshaft does not switch into early position

- Dirt in system
- Solenoid hydraulic valve mechanically blocked

Affected terminals

Diagnosis/Troubleshooting






Figure 1:






Figure 2: