PCM2/CDR23: 8020

8020 Navigation

GPS antenna short circuit

Diagnostic conditions
- Ignition on
- PCM2 on

NOTE:
- Fault code 8003 is recorded in the PCM2 MMI if the operating buttons are actuated for one or more minutes.
- Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort (applies only to version number [<] 03).

Possible cause of fault
- Short circuit to ground or B+ in the antenna wire between GPS antenna and PCM2
- GPS antenna faulty
- Navigation module faulty
- PCM2 faulty

NOTE:
- The MOST optical waveguide is connected to the following control modules:
- PCM2
- CD changer
- Amplifier
- Telephone/telematics

Affected pins
Plug I, pin 1

Diagnosis/troubleshooting