Learning Function

Learning Function

Immobilizer

The immobilizer code can be entered under menu item "Learning functions/immobilizer" after the alarm control module is replaced.


CAUTION:
The immobilizer code cannot be deleted or changed again.
An incorrect input will render the control module useless.
Input and check immobilizer code carefully.


Transponder key

A new remote control can be adapted for the vehicle under menu item "Learning functions/transponder key". The old transponders can be taught to the new control module after replacement of the alarm system control module and input of the immobilizer code. Refer to "Teaching hand-held transmitter" and "Reading out remote controls".

Remote control

Up to four remote controls can be adapted to the control module under menu item "Learning functions/remote control". The old remote controls can be taught to the new control module after replacement of the alarm system control module and input of the immobilizer code. Refer to "Teaching hand-held transmitter".

Reading out remote controls

Under the menu item "Reading out remote controls", the data of the remote controls can be read out after the alarm system control module is replaced. If it is not possible to read out and transfer the remote controls (e.g. no communication with the control module), the old remote controls can be adapted to the new control module (teaching hand-held transmitter).

Transferring remote controls

Under the menu item "Transfer remote controls", the data read out from the remote controls can be transferred to the new control module.