14 - O2 Sensor Heating After TWC, Bank 1 - Signal Implausible
P1117
14 Oxygen Sensor Heating After TWC, Bank 1 - Signal Implausible
Diagnosis conditions
- Exhaust temperature between 300 °C and 600 °C
- Battery voltage between 9.5 V and 16 V
Possible fault cause
- Corrosion in connector
- Oxygen sensor
Affected terminals
- II/7
Diagnosis/Troubleshooting
NOTE: Do not use contact spray on the connectors to oxygen sensor.
Work Instruction 1 - 3:
NOTE: Do not exchange oxygen sensors ahead of catalytic converter and after catalytic converter.
Oxygen sensors ahead of and after catalytic converter