Fault Code 9123

Fault Code 9123

Oil Level

Diagnostic conditions
- Evaluation after triggering of oil level measurement in the on-board computer

Possible cause of fault
- Sensor for oil level indicator faulty
- Short circuit to voltage/ground or open circuit in the wiring between the sensor for oil level indicator and instrument cluster

NOTE:
- The fault code 9123 is entered after the oil level measurement is triggered in the event of a fault. The warning "oil level indication failure" is emitted at the same time in the display of the instrument cluster.
- After the cause of the fault has been remedied, the oil level measurement must be re-triggered. After the oil level measurement has been completed, the fault changes from "present" to "not present"

Affected terminals
- Plug B, terminals 2 and 18

Diagnosis/troubleshooting




Work instructions 1 and 2




Work instructions 3 - 7