8001 CDR23

8001 CDR23

Voltage Supply

Diagnostic conditions
- Ignition on
- Engine running
- Start CDR23.

NOTE: The fault memory status (present/not present) is always updated when the motor is running.

Possible cause of fault
- Battery voltage too low '< 9 V for > 30 sec.'
- Battery voltage too high '> 16 V for > 30 sec.'
- Check fuses
- Check battery
- Check generator regulator
- Check generator

Affected pins
Radio connector A, pin 4 and pin 8







Diagnosis/Troubleshooting

Work Instruction 1 - 4: