O2 Sensor Heating Ahead of TWC, Bank 2 - Signal Implausible

P1119

5 Oxygen Sensor Heating Ahead of TWC, Bank 2 - Signal Implausible

Diagnosis conditions
- Mass air flow above 32 kg/h
- No other oxygen sensor faults
- Battery voltage between 9.5 V and 16 V

Possible fault cause
- Open circuit
- Oxygen sensor heating faulty
- DME control module

Affected terminals
- II/13

Diagnosis/Troubleshooting

NOTE: Do not use contact spray on the connectors to oxygen sensor.

Work Instruction 1 - 5:

NOTE: Do not exchange oxygen sensors ahead of catalytic converter and after catalytic converter.




Oxygen sensors ahead of and after catalytic converter