Sealing Ring For Halfshaft Flange

Tools

Item 1:

Removing Sealing Ring For Halfshaft Flange

NOTE: Protect drive shafts from damage. (Use dia. 30 mm piece of hose).







1. Uncouple drive shaft on the transmission side.
2. Unscrew fastening screw for the halfshaft flange, unclip the B+ cable on the air flange and pull out the halfshaft flange.
3. Lever out sealing ring using a suitable tool.

Installing Sealing Ring For Halfshaft Flange







1. Fill the space between the dust and sealing lips with grease (e.g. Liqui-Moly) and drive in the sealing ring up to the mounting face with special tool pressure piece No. 9252.
2. Push in the halfshaft flange and tighten the fastening screw.

Tightening torque: 44 Nm (32 ftlbs.).

3. Clip the B+ cable onto the air flange and mount the drive shaft.

Tightening torque: 81 Nm (60 ftlbs.)

Tightening Torques