Fault Code 5024

Fault Code 5024

CAN message missing from Tiptronic

Diagnostic conditions
- Ignition on
- No CAN messages from the Tiptronic control module

Possible cause of fault
- Open circuit in CAN bus
- Incorrect transmission variant coded
- Tiptronic control module faulty

Affected terminals
PSM 5.3 Terminals 61,63
PSM 5.7: Terminals 24, 40

Diagnosis/troubleshooting

NOTE:
- Before troubleshooting, read out the fault memory of the Tiptronic control module and eliminate any faults present.
- If the fault '39 CAN: DME communication disturbed' is present in the Tiptronic control module, there may be an open circuit in the CAN bus between the DME control module and the Tiptronic.