Removing and Installing Guide for Fabric Lining

Removing And Installing Guide For Fabric Lining







Removing guide for fabric lining







1. Unscrew fastening screws -1- from the guide for fabric lining -2- and remove.
2. Pull electrical wire out from the guide for fabric lining on the rear side.

Installing guide for fabric lining







1. Press in electrical wire into the guide for fabric lining at the side. Begin at the marking (white point) on the wire. Connect the plug connection.
2. Position guide for fabric lining -2- on inner roof module, screw in fastening screws -1- .
3. Set the adjusting dimension -60 mm- for the fabric lining guide and the roof module guide using the distance gauge -3-.
4. Tighten the fastening screws -1-.

Instructions for making distance gauge







Make distance gauge out of wood or plastic according to the specified dimensions A, B, C, D.
- A = 60 mm
- B = 15 mm
- C = 1.2 mm
- D = 15 mm


Tools and materials







Test and adjusting values







Tightening torques